Present Status and Prospects of Tomatoes in Pakistan
Khalid Mahmood Khokhar
Tomato (Lycopersicon esculentum Mill.) is one of the most important vegetables worldwide. As it is a relatively short duration crop and gives a high yield, it is economically attractive and the area under cultivation is increasing. Tomato belongs to the Solanaceae family. Tomatoes contribute to a healthy, well-balanced diet. They are rich in minerals, vitamins, essential amino acids, sugars and dietary fibers. Tomato contains vitamin B and C, iron and phosphorus. Tomato fruits are consumed fresh in salads or cooked in sauces, soup and meat or fish dishes. They can be processed into purées, juices and ketchup. Canned and dried tomatoes are economically important processed products. Yellow tomatoes have higher vitamin A content than red tomatoes, but red tomatoes contain lycopene, an anti-oxidant that may contribute to protection against carcinogenic substances.
Tomatoes leading producing countries
On a global scale, the annual production of fresh tomatoes accounts for approximately 159 million tonnes. However, more than a quarter of those 159 million tonnes are grown for the processing industry, which makes tomatoes the world’s leading vegetable for processing. Tomato production in Pakistan was 530 thousand tones during 2011. The nine largest producing countries account for 74.2 % of the world’s yearly production (2011). Figures for these countries for 2011 were:
- China (48.6 million tonnes)
- India (16.8 million tonnes)
- USA (12.6 million tonnes)
- Turkey (11 million tonnes)
- Egypt (8.1 million tonnes)
- Iran (6.8 million tonnes)
- Italy (5.9 million tonnes)
- Brazil (4.4 million tonnes)
- Spain (3.8 million tonnes)
Export of tomatoes from Pakistan
Tomato is a vegetable crop of significant economic value in Pakistan. Generally speaking annual export of tomatoes from the country averaged about 9832 tonnes during the past 5 years. Yearly exports are given in Table 1. The lowest export figures in 2006/07 and 2007/08 are attributed to bad crop harvest and rendering exports un-economical. Pakistan exported tomatoes to a quantum of 5692 tonnes, and earned rupees 77 million during 2009-10.
Table 1. Export of tomatoes from Pakistan, 2005/10
| Year |
Quantity (tonnes) |
Value (Million, Rs) | Price per kg (Rs) |
| 2005/2006 | 1040 | 11.9 | 11.4 |
| 2006/2007 | 525 | 5.7 | 10.9 |
| 2007/2008 | 997 | 12.5 | 12.5 |
| 2008/2009 | 40907 | 412.7 | 10.1 |
| 2009/2010 | 5692 | 76.9 | 13.5 |
| Average (2005-2010) | 9832 | 104 | 11.7 |
Source: Agricultural Statistics of Pakistan, Ministry of Food, Agriculture and
Livestock, Government of Pakistan, Islamabad.
Per unit export prices are also low which apparently are attributed to produce quality. The destination-wise exports of tomatoes are given in Table 2.
Table 2. Country-wise export of tomatoes from Pakistan
| Country
|
2005-06
(tonnes)
|
2006-07
(tonnes)
|
2007-08
(tonnes)
|
2008-09
(tonnes)
|
2009-10
(tonnes)
|
Average
(tonnes) |
| Afghanistan | 104 | 517 | 425 | 40013 | 5290 | 9270 |
| Iran | 699 | - | 391 | 28 | 1 | 224 |
| UAE | - | 3 | 180 | 229 | 393 | 161 |
| Others | 237 | 5 | 1 | 637 | 8 | 178 |
Source: Agricultural Statistics of Pakistan, Ministry of Food, Agriculture
and Livestock, Government of Pakistan, Islamabad.
Tomato crop has a tremendous export potential due to its demand in the international market. Tomatoes are exported to Afghanistan, Iran, U.A.E, Saudi Arabia, Sri Lanka and India. Afghanistan, Iran and UAE are the main markets for tomato exports from Pakistan. Pakistan has the potential to increase share in these markets.
Trends, area, production and yield
The area, production and average yield of tomatoes in Pakistan is given in Table-3. Since 2000-01 to 2009-10, the area under tomato crop has increased from 27.9 to 50 thousand hectares and production has increased from 268.8 to 476.8 thousand tons. The present national yield of tomatoes based on ten years average is 10.1 tonnes/ha which is quite low. To obtain a potential yield, high yielding varieties and improved production technology have to be adopted.
Table 3. Area, production and average yield of tomatoes in Pakistan (2000 to 2010)
| Year | Area
(000, ha) |
Production
(000, tonnes) |
Yield
(t/ha) |
| 2000-01 | 27.9 | 268.8 | 9.6 |
| 2001-02 | 29.4 | 294.1 | 10.0 |
| 2002-03 | 31.0 | 306.3 | 9.9 |
| 2003-04 | 39.0 | 412.8 | 10.6 |
| 2004-05 | 41.4 | 426.2 | 10.3 |
| 2005-06 | 46.2 | 468.2 | 10.1 |
| 2006-07 | 47.1 | 502.3 | 10.7 |
| 2007-08 | 53.2 | 536.2 | 10.1 |
| 2008-09 | 53.4 | 561.9 | 10.5 |
| 2009-10 | 50.0 | 476.8 | 9.5 |
Source: Agricultural Statistics of Pakistan, Ministry of Food, Agriculture and
Livestock, Government of Pakistan, Islamabad.
The province-wise area of tomatoes based on the average data of five years (2005-10) is given in Table 4. Balochistan is the leading tomato province cultivating annually an average area of 18.1 thousand hectares followed by KPK and Sindh with area of 15.6 and 10.7 thousand hectares, respectively.
| Province | 2005-06
|
2006-07
|
2007-08
|
2008-09
|
2009-10
|
Average |
| Punjab | 5.3 | 5.3 | 5.5 | 5.6 | 6.0 | 5.5 |
| KPK | 16.2 | 16.1 | 16.2 | 16.5 | 13.1 | 15.6 |
| Sindh | 9.4 | 8.7 | 10.9 | 12.4 | 12.2 | 10.7 |
| Balochistan | 15.4 | 17.0 | 20.5 | 19.0 | 18.7 | 18.1 |
| Pakistan | 46.3 | 47.1 | 53.1 | 53.5 | 50.0 | 49.9 |
Table 4. Province-wise area (000, ha) of tomatoes in Pakistan (2005-10 Average) Source: Agricultural Statistics of Pakistan, Ministry of Food, Agriculture and
Livestock, Government of Pakistan, Islamabad.
The province-wise production of tomato based on the average data of five years (2005-10) is given in Table 5. Balochistan is the leading tomato province producing annually 205.6 thousand tonnes followed by KPK and Sindh with production of 153.1 and 80.4 thousand tonnes, respectively.
Table 5. Province-wise production (000, tonnes) of tomatoes in Pakistan (2005-10 Average)
| Province | 2005-06
(000, tonnes) |
2006-07
(000, tonnes) |
2007-08
(000, tonnes) |
2008-09
(000, tonnes) |
2009-10
(000, tonnes) |
Average
(000, tonnes)
|
| Punjab | 64.6 | 64.8 | 70.1 | 72.5 | 77.9 | 70.0 |
| KPK | 161.6 | 160.8 | 162.0 | 161.8 | 119.3 | 153.1 |
| Sindh | 48.3 | 60.5 | 91.8 | 100.9 | 100.4 | 80.4 |
| Balochistan | 193.6 | 216.2 | 212.4 | 226.7 | 179.3 | 205.6 |
| Pakistan | 468.1 | 502.3 | 536.3 | 561.9 | 476.9 | 509.1 |
Source: Agricultural Statistics of Pakistan, Ministry of Food, Agriculture and
Livestock, Government of Pakistan, Islamabad.
Growing areas:
Tomato is grown most of the year in some parts of the county. However, the supplies are substantially reduced during intense heat and rains of summer and monsoon months from June to August. In the hot-wet season, production shifts from lowlands to the relatively cooler and dryer highlands. Because high land production areas are limited, tomato supply dwindles in the wet season resulting in drastic price increases. Another period of stress is the onset of frost during December and January when production is depressed. The major growing areas of tomato in Pakistan are given in Table 6.
Table 6. Major growing areas of tomato in Pakistan
| Zones | Agro-ecological zones/divisions |
| Southern Punjab | Rahim Yar Khan, Khanewal, Muzaffargarh, Bahawalnagar, Bahawalpur
|
| Central Punjab | Khushab, Okara, Sahiwal, Sheikhupura, Faisalabad, Sargodha
|
| Northern Punjab | Gujranwala, Sialkot, |
| Southern Region of Sindh | Hyderabad, Badin, Thatta, Karachi
|
| Northern Region of Sindh | Mirpurkhas, Nawabshah, Nowshero Feroz, Larkana Sakkur
|
| Uplands and Plains of KPK | Swat, Malakand, North Waziristan, Kurram |
| Foothills and Plains of KPK | Charsadda, Mardan, Swabi, Nowshera
|
| Southern Parts of KPK | Tank, South Waziristan
|
| Uplands of Balochistan | Pislin, Khuzdar, Loralai
|
| Plains and Foothills of Balochistan | Awaran, Killa Saifulla
|
Varieties
All the cultivars which are commercially grown in the country have been introduced from other countries mainly from Europe and America. The principal cultivars grown are; Money Maker, Roma, Riogrande.
Growing Seasons
Province-wise nursery sowing, transplanting and harvesting times of tomatoes are given in Table 6.
Table 6. Province-wise nursery sowing, transplanting and harvesting times of tomatoes
| Province
|
Nursery Sowing | Transplanting | Harvesting |
| Punjab
|
(i) July/August (Katha Saghral)
(ii) October (Central Plains) (iii) November to December March/April (Hilly Areas)
|
(i) August/ September
(ii) November (iii) February/March
May/June |
(i) December to February
(ii) April to May (iii) May to June August to October |
| KPK | (i)August (Dargai)
(ii) April to May (Northern Areas) (iii) May to June |
(i) October
(ii) May to June (iii) June to July |
(i) December to January
(ii) July to August (iii) October to November
|
| Sindh
|
(i) June/July
(ii) August to October
(iii) December |
(i) July/August
(ii) September to November
(iii) February
|
(i) September to November
(ii) December to February (iii) May to June |
| Balochistan
|
(i) November /December (Plains)
(ii) March /April (Hilly Areas)
|
(i) March
(ii) April/May
|
(i) May to June
(ii) June to August
|
Current National Problems
- Tomato crop is very susceptible to viruses (TMV, TYLCV) and mosaic diseases, especially when the crop is transplanted early during the months of August-September. Activity of virus vector especially whitefly is very high at that time of the year. Nematode problem is also becoming serious.
- Prevalence of high temperatures in Punjab limits the production period in summers.
- Tomato grown in Balochistan (Quetta Div), KPK (Dargai area) and in Katha Saghral, Katha Misral and Kotli Dakhli villages of Khushab districts in Punjab are severely attacked by parasitic plant “Orobanchi. The farmers suffer heavy losses on account of this problem.
- The crop also suffers due to early and late blights, blossom end rot and bacterial wilt.
- Local hybrids are not available.
Climate
Tomato is very sensitive to cold. In most cultivars, flowering does not develop normally below 15oC or above 35oC. The optimum range lies between 21oC and 24oC. Seed germination does not occur in soil temperature below 10oC or beyond 35oC. The optimum range for germination occurs between mean soil temperatures of 15.5oC and 29oC. In the plains, most difficult period of tomato production is from mid May to June when the day and night temperatures are very high and during monsoon season (July-August) when there is a rapid development of pests, diseases and weeds.
Soil
Tomato thrives best almost on all types of soils. A well fertile sandy loam soil is best suited to produce early crop. The loams and clay loams have greater water-holding capacity and are better suited to longer season of production. Soils rich in organic matter and mineral nutrients are suitable for higher yields. Soils ranging from pH 5.5 to 7.0 are best suited for tomato production.
Land preparation
Preparation of land is necessary for growing successful crops. Well rotten farm yard manure should be applied @ 10-12 tons per acre at least one month before planting the crop for maintaining proper physical conditions and fertility status of the soil. Five to six ploughings will be needed to prepare a good seed bed. The ploughed land must be disked well and should be thoroughly leveled for even distribution of water. Raised beds of 1.5 m breadth should be made.
Seed rate
As much as 120 to 150 g of seed is required to prepare nursery for one acre.
Nursery raising
Transplants for open field can be raised in the plastic tunnel if they are to be grown in a season when climatic conditions outside would not be favourable for growth. Mixture of well rotten farm yard manure, sand and soil in the proportion of one part each is commonly used as medium for growing transplants.
Transplanting
Seedlings of 15-25 cm tall with 3-5 true leaves are most suitable for transplanting. Before transplanting, the seedlings should be hardened by gradually reducing the frequency of irrigation and exposing the seedlings to strong sunlight. The seedlings in the nursery beds should be watered on the day before transplanting. Transplanting of seedlings in the field should be done late in the afternoon to curtail transpiration of the seedlings. The soil around the roots of the shifted plants should be well pressed to ensure a good contact with the roots and the plants are irrigated immediately. The seedlings are transplanted on both sides of 1.5 meter wide raised beds with plant to plant distance of 50 cm.
Fertilization
General recommendation for chemical fertilizer to be applied is, 46 kg Nitrogen, 60 kg Phosphorus and 25 kg Potash per acre. For better results, full quantity of Phosphorus and half of Nitrogen and Potash should be applied before transplanting of seedlings. Remaining half of Nitrogen and Potash should be applied 6-8 weeks after transplanting.
Irrigation
Tomato is not resistant to drought. Yields decrease considerably after short periods of water deficiency. It is important to water the plants regularly, especially during flowering and fruit formation. The amount of water that is needed depends on the type of soil and on the weather (amount of rain, humidity and temperature). About 20 mm of water per week is needed under cool conditions, about 70 mm during hot and dry periods. Watering plays a major role in attaining uniform maturity and reducing the incidence of blossom end rot, a physiological disorder associated with irregular water supply and the resulting calcium deficiency in the fruit during its enlargement. The plants are irrigated just after transplanting. Irrigation with an interval of 7-8 days is recommended. The irrigation interval can be decreased from 5-6 days when weather is too hot. Irrigation water should be given in sufficient quantity but with care so that beds should not be submerged into water.
Weeding
Weeds compete with the tomato plants for light, water and nutrients. Sometimes they provide shelter for organisms that cause tomato diseases, such as Tomato Yellow Leaf Curl Virus (TYLCV), and reduce the yield. Effective non-chemical weed management begins with deep ploughing, diverse crop rotations and competitive cover crops. The following integrated practices are useful for controlling weeds effectively:
- Remove the previous crop residues and use sanitation practices to avoid introducing weed seeds.
- Deep cultivation and exposing soil to sunlight before transplanting help to destroy the weed seeds.
- It is important to keep the field weed free for 4-5 weeks after transplanting. It is during this period that weed competition must be suppressed to avoid reduction in yield.
- Weeds growing between crop rows are the easiest to control. Shallow ploughing (up to a depth of 15-20 cm) or using mulch usually removes them.
- Hilling the soil towards the plant row (earthing-up) helps to smother small weeds in the row and tomato plants develop roots further up the stem.
- Mulching with plant residues is good for weed suppression, soil moisture retention and slow release of nutrients as they decompose.
Harvesting
Harvesting will continue for about one month, depending on climate, diseases and the cultivar planted. Tomatoes can be classified in four stages of maturity:
- Stage 1: Seed are white in colour (immature) and can be cut when the tomato is sliced. There is no juice inside the tomato.
- Stage 2: Seeds have a tan colour (mature) and some juice present.
- Stage 3: Seeds are pushed aside when cut. The colour inside is still green.
- Stage 4: Juice becomes red in colour.
Tomatoes that are harvested at the first stage of maturity will ripen into poor-quality tomatoes. Tomatoes harvested at third and fourth stages of maturity will ripen into good-quality tomatoes. It is also good to look carefully at how ripe the tomatoes are. How ripe
a tomato is when it is harvested affects the fruit composition and tomato quality. Tomatoes accumulate acids, sugars and ascorbic acid when they ripen on the plant. Field-ripened tomatoes have a better flavour and overall quality than tomatoes that ripen after picking. Hence it is important to understand ripeness stages.
Post-harvest handling
Tomatoes are picked in picking containers (nylon net bags or plastic buckets). These picking containers need to be emptied into larger containers which must not weigh more than 25 kg. The containers need to hold only tomatoes that are mature, ripe and free from damage. When the field containers are full, they should be transported to a sorting area located on the farm. In sorting areas, the fruits are washed and sorted by size, colour and variety. Sorting areas need to be out of direct sunlight, preferably cool and clean. Washing and sorting can be done with long water containers. It is also possible, to add a permissible amount of chlorine solution to the water, to disinfect the tomatoes. Once the tomatoes are taken out of the sorting canal they must be dried and carefully placed in a container, ready for dispatch to their final destination. Uniformity is one of the first attributes that buyers look for. Appearance comes before aroma and taste.
Packaging
Badly packed tomatoes will not only ruin the tomato crop for sale, but will also mean lower prices. Even if tomatoes are just being sold at the farm gate, they will require some form of packaging, which can be a simple traditional basket. Packaging protects against pathogens, natural predators, loss of moisture, temperatures, crushing, deformation of tomatoes and bruising. It is a good idea to use padding material at the bottom of packages and in between layers of tomatoes.
Storage
Storing tomatoes in tropical and subtropical climates can be difficult without cold storage. Tomatoes that are to be sold fresh for table consumption must not be stored for long. Tomatoes are picked when ripe and stored for a few days in a cool room, after which they transported to distant markets. During the journey the tomatoes will ripen to the market stage. Tomatoes will deteriorate if they are kept at temperatures below 10°C for longer than 2 weeks or if kept at 5°C for longer than 6 to 8 days.
Insects
Insects, such as whitefly and aphids cause physical damage only when they occur in large numbers. However, they may transmit viruses, which can cause much greater damage. These insects can come from outside your field, and may cause entire crop to become infected. Also, leaves damaged by insects become more susceptible to fungal and bacterial diseases.
Whitefly (Bemisia tabaci)
The adult fly is white in colour and 1-2 mm long. It feeds, just like the larvae, on the leaf sap. When plant leaves are turned over, a whole swarm of whitefly may fly up. They lay eggs on the underside of the leaves. The eggs hatch after about 1 week. After 2 to 4 weeks the larvae form a cocoon and metamorphosis takes about one week. Whiteflies are especially a problem in the dry season. Once the wet season starts they disappear. Some measures to combat whitefly:
- Encourage the presence of natural predators of whitefly, by planting shrubs or other plants between the crop rows (interplanting) or along pathways between borders.
- Use resistant cultivars (hairy leaves make it difficult for the whitefly to lay its eggs).
- Spray a solution of kerosene and soap to control whitefly.
Aphids (Aphidae)
Aphids are soft, oblong insects about 2.5 mm in length. Direct damage occurs when they attack the crop in large numbers, especially the youngest leaves and stems. In addition to causing direct damage, aphids also transmit several viruses. Measures to control aphids:
- Remove old crop debris before sowing new crop.
- Intercrop with other crops.
- Use nitrogen fertilizer in moderate amounts.
- Spray a solution of soap, cow urine or neem extract (Azadirachta indica).
Diseases
Tomato plants are susceptible to several fungi, bacteria and viruses. Fungi and bacteria cause foliar (leaf), fruit, stem or root diseases. A virus infection often leads to dwarfed growth and decreased production. Damage caused by diseases can result considerable yield losses for a farmer. Some diseases commonly found in tomatoes are discussed below.
Bacterial wilt (Ralstonia solanacearum)
This bacterium is especially common in humid tropical lowlands, where temperatures are relatively high. It causes bacterial wilt, which is a soil-borne disease. The first symptoms in infected plants are wilting of terminal leaves, followed in 2-3 days by a sudden and permanent wilt, but there is no yellowing. Adventitious roots may develop on the main stems. The vascular system in the stem of infected plants appears light brown in transverse or longitudinal section; it becomes a darker brown at a late stage of infection. The pith and the cortex near the soil line also become brown when the plant is completely wilted. A white, milky stream of bacteria will ooze from xylem elements when stem sections of infected plants are suspended in water. The bacteria survive in the soil and enter roots of young plants
through wounds made by transplanting, cultivation, insects or certain nematodes. The bacteria are spread through irrigation water, soil movement, or moving infected plants (e.g. when transplanting). The following measures will help to control bacterial wilt:
- Use tolerant/resistant varieties.
- Avoid infested fields. Once the soil has been infected, do not grow Solanaceae for at least 7 years. Rotate with cereal crops.
- Do not injure roots or leaves, so be careful during transplantation and prune as little as possible.
- Make sure the field is well drained.
Fusarium wilt (Fusarium oxysporum)
From the bottom up, leaves wilt, turn yellow and curl at the edges. A brown stain can be seen if the stem or roots are cut. The plant may wilt on only one side or on a leaf, while the other half or rest of the plant remains healthy for a long time. Pink fungus fluff is found on dead plant parts. Measures that can help control Fusarium wilt.
- Use resistant or tolerant varieties.
- Adopt crop rotation.
- Remove and burn affected plants.
- Minimize the watering schedule. To prevent the soil drying out apply mulch on the seedbed.
- Decrease the acidity of the soil by applying calcium or marl.
Verticillium wilt (Verticillium albo-atrum)
This disease is most common in cooler climates (e.g. highlands). Signs of infection are similar to those of Fusarium, but they appear more slowly. The plants wilt, and leaves become yellow. Many side roots may form at the base of the plant. The fungus spreads through crop debris, especially in slightly acidic soils (low pH). This disease also affects other Solanaceous plants. Measures to control this wilting disease:
- Use resistant/tolerant varieties.
- Weed thoroughly.
- Plough and clear crop remains.
- Use healthy seed.
- Rotate with plants other than Solanaceae.
- Apply calcium or marl in the soil.
Early blight (Alternaria solani)
This fungus can be found everywhere, and its effect is most serious in humid and hot climates. It is spread via seed, wind, rain and infected plant remains. Plants that have been damaged are more susceptible to this fungus. Round, brown spots (with concentric rings) appear on the leaves, reaching a diameter of 1.5 cm. Sometimes small lumps can be found on the stem or on leaves, causing leaves to turn yellow and wilt. Flowers and small fruit fall off. Major control measures:
- Use tolerant varieties.
- Remove and burn damaged plant parts.
- Weed regularly and thoroughly.
- Use pathogen-free seeds.
- Adopt crop rotation.
- Do not plant young plants near older plants.
- Apply effective fungicides
Late blight (Phytophthora infestans)
This fungus can be found in all regions of the world, but is more common in highlands or in cool humid conditions in lowlands. The fungus is usually spread via crop remains. Dark, watery marks with a yellow spot on the inside are visible on the leaves. Sometimes the marks start at the edge of the leaf and spread inward, sometimes the spots spread from the centre of the leaf outward. On the underside of the leaves, the spots are white. The stems and fruit can be affected also. Fruit gets brown spots and the leaves wilt. The signs of late blight become visible early in the growing season. Measures that can prevent late blight:
- Use tolerant varieties.
- Weed regularly and thoroughly.
- Remove and burn affected plants and plant debris.
- Do not plant young plants near older plants.
- Apply mulch on seedbeds, so that less watering is needed.
- Avoid planting tomato near potato crops.
- Increase aeration by staking and removing affected leaves.
Cucumber mosaic virus
CMV causes stunting in tomato plants. Leaves may show a mild green mottling or more shoestring symptoms in which the leaf blades are greatly reduced. Fruits are small in size and often misshapen. CMV is transmitted by different aphid species. Aphids usually introduce the virus into a tomato crop from weeds or neighbouring crops. Control of the vector is important to prevent CMV epidemics:
- Grow resistant varieties.
- As CMV has a broad host range, it is important to eliminate weeds and ornamental plants that harbour the virus.
- Remove and destroy infected individual plants as this helps to limit the virus spread within the field.
Tomato Yellow Leaf Curl Virus
TYLCV occurs worldwide. Infected plants are erect and stunted. Leaves are yellow and curl upward or downward. An entire yield can be destroyed if plants are infected in the nursery. Whitefly transmits TYLCV.
Common control measures:
- Use tolerant varieties.
- Use reflective plastic mulch.
- Protect seedlings with a net in the nursery.
- Control the insect vector.
Other causes of crop damage
The abnormalities described below are not caused by insects or diseases but mostly by nutritional deficiencies and unfavourable climatic conditions.
Fruit splitting
Little splits appear in the (usually ripe) tomato fruit due to large fluctuations in the moisture content of the soil or due to wide fluctuations of temperature. These reduce the fruit quality. Sensitivity to these fluctuations varies depending on the cultivar. Also, the splits make it easy for pests and diseases to enter the tomato. Two ways to prevent splits are by covering the ground with a layer of mulch and watering lightly but more frequently, or by picking fruit just before it is ripe and letting it ripen indoors in a dry spot (e.g. on straw).
Sunburn (or sunscald)
Brown or grey indentations appear on the fruit. The part of the fruit that is most exposed to the sun rots first. This can be prevented by providing more shade during fruit ripening by planting trees, or by judicious intercropping. Sunburn is more frequent on un-staked tomatoes.
Blossom-end rot
This disease is caused by calcium deficiency. This is usually a result of too much salt in the soil, which is caused by the use of saline water, or irrigating with too little water during the dry season. The amount of salt in the soil can be lowered by flushing it out with one or more abundant applications of salt-free irrigation water (normally during the rainy season), making sure that there is good drainage.
Future strategies:
- Tomato germplasm resistant to viruses and tolerant to high summer temperature should be introduced for the adaptation as such or for utilization in hybridization programme for developing new high yielding disease resistant cultivars.
- Research should be carried out to find suitable and effective ways of combating with orobanchi problem in the affected areas.
- Protected culture technology should be introduced on large scale so as to supply the produce during scarcity period.
- Control of shoot/fruit borer.
- Use of growth regulators for better fruit set.
- Shelf life extension/post-harvest studies.
By
Dr. Khalid Mahmud Khokhar,
Principal Scientific Officer(R), Vegetable Crops,HRI
National Agricultural Research Centre,Islamabad, Pakistan.
The writer is a regular contributor to Agriculture Corner.
Incoming search terms:
- tomato cultivation in pakistan
- tomato in pakistan
- tomato production in pakistan
- tomato diseases in pakistan
- tomato production in pakistan 2014
- production of tomatoes in balochistan 2014
- tomato yield per acre in pakistan
- present status and prosptus of tomato
- tomato varieties in pakistan
- tomato diseases in pakistan and treatment




10:34 am
The paper on tomato is very good, it is proposed that research may be laid out on low productivity of tomato in punjab and suggest how more production can be obtained
5:42 am
Nice information contribution for tomato crop in Pakistan…..
2:57 pm
good information about tomato crop